|
ICQ# 16388743
|
MSI K7T Pro 2-A Review
Written on: April 03,2001 Written by: Enginjon
MSI continues their surge into the Socket-A motherboard market with the release of the MSI K7T Pro2-A. This board has changed slightly since the release of its little brother the K7T Pro2. It is based on the VIA KT133 chipset with the newer VIA 686B South Bridge. The new South Bridge gives full Ultra DMA 33/66/100 support for best performance with both new and old IDE devices. The board is designed for use with 100 MHz FSB AMD Athlon Thunderbird and Duron processors (200 MHz internal system bus). The board also comes with onboard AC ’97 sound.
The K7T Pro2-A is full of features. Onboard you will find: § Support for Socket-A Athlon/Duron processors (600MHz ~ 1.2 GHz and higher) § VIA KT133 Chipset / VIA 686B § FSB at 200 MHz § AGP 1x/2x/4x and PCI Advanced high performance memory controller § Support for PC100/133 SDRAM (3) slots for 168-pin 3.3V Unbuffered DIMM (1.5 GB max) § DirectSound AC'97 Audio § Dual bus Master IDE Ultra DMA33/66/100 § ATX Form Factor § (6)32-bit PCI slots, (1) CNR slot, (1) Floppy port, (2) Serial ports, (1) Parallel Port, (1) IrDA connector, (1) Game Port, (4) USB ports (2 rear connector, 2 USB front pin headers)
|
News Updated every 15 minutes, 365 days a year
Reference MadnessPC Monthly Giveaway Page
|
Send mail to merc@merc100.com with questions or comments about this web site. Got news? send to news@merc100.comCopyright © 2000-2001 MERC100.com. Privacy Policy. Most the information contained on this site is copyrighted material. It is illegal to copy in this information without the written consent of the appropriate owner(s). MERC100.com is not responsible for damages that the information on this site may cause to your components / system etc...Logo design by Janne Puonti |